|Place of Origin:||China|
|Minimum Order Quantity:||100 USD|
|Price:||0.001 USD ~ 0.1 USD / PCS|
|Packaging Details:||PE inside，Carton outside|
|Payment Terms:||T/T, L/C|
|Supply Ability:||100000000 PCS / Month|
|Size:||Any Size Acceptable||Certification:||ROHS/ISO9001:2000/CE|
|Approved:||FDA,ROSH Or REACH||MOQ:||Usd 100|
30 Hardness FKM O Ring,
AS568 Rubber O Ring Seal,
ROHS Rubber O Ring Seal
|Advantage||1,Excellent High Temperature Resistance|
|2. Excellent Abrasion-Resistance|
|3,Excellent Oil Resistance|
|4.Excellent Weathering Resistancee|
|5.Excellent Ozone Resistance|
|6.Good Water Resistance|
|Disadvantage||1.Poor Low Temperature Resistance|
|2.Poor Oxygenated-Solvent Resistance|
|Temperature||-20℃~230℃ , -40℃~250℃(special formula)|
|3.For Electronic Products|
ORK offers the seal industry's largest inventory of o-rings, which includes every standard AS568 and ISO 3601 size, and the following:
O-Ring Sizing Guides
Standard Compound: -30° to +120°F
Hardness (Shore A): 40 to 90.
Features: Comprised of the copolymer butadiene and acrylonitrile, in varying proportions. Compounds can be formulated for service temperature ranging from -85°F to +275°F. Use of Carboxylated Nitrile can have superior abrasion resistance, while still having improved oil resistance.
Limitations: Nitrile compounds are attached by small amounts of Ozone. Phthalate type plasticizers are commonly used in compounding Nitrile Rubber. These plasticizers can migrate out and cause problems with certain plastics. Also, new regulations on certain phthalates have limited their use.
Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm, 29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City,
Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
Contact Person: Aaron