FKM Fluorelastomer O Ring: RoHs, -20℃~200℃, High Temp Resistance, Abrasion Resistant, Oil Resistance

FKM Fluorelastomer O Ring: RoHs, -20℃~200℃, High Temp Resistance, Abrasion Resistant, Oil Resistance

Material Description:

Application:

Vtion o rings always used for hydraulic cylinder.

Advantages of our factory:

1, Wide range of dimensions:

a) Standard, including AS 568, BS 1806, French, JIS B 2401-P / G / V / S series

b) Nonstandard, we also have thousands of molds besides standard sizes.

Total o ring molds, more than 4000. ID(0.5mm~1500mm), CS(0.3mm~23mm)

2, Wide range of colors:

Black, white, blue, yellow, red, green, we can also adjust colors by color number (Pantone).

3, Wide range of materials:

NBR(Nitrile Rubber/Buna-N), SIL(Silicone Rubber), EPDM(Ethylene propylene Rubber),

FKM(fluoroelastomer FKM/FPM), HNBR (Hydrogenate Nitrile), CR/Neoprene/Polychloroprene,

SBR(Styrene Butadiene Copolyme), IIR(Butyl Rubber), PU (polyurethane rubber),

FLS (Fluorinated Silicone Rubber), FFPM(FFKM).

4, All kinds of certificats:

ISO9001, TS16949, FDA, RoHs, Reach and so on.

Products Show:

Name:  o ring,  Material:  FKM / FKM / FPM / Fluorelastomer ,  Color:  Black,  Application:  Hydraulic Cylinder

Process Flow:

Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection → Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing

Packing & Delivery:

Packing: PE bag inside, Carton outside.

Carton size: 46cm*33cm*33cm, 51cm*33cm*33cm, 29cm*23cm*19cm

Delivery: Large quantity by ship, small quantity by air or express.

FAQ:

1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province

2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.

3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.

4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.

5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$