ORK Standard / Nonstandard FKM O Rings Cord , Fluorocarbon Oring Set
PRODUCTS DISCRIPTION:
O-ring is a kind of rubber ring with round cross section, because of its O-type section,it is called O-ring. It is widely used in hydraulic and pneumatic transmission system .Our company's goal is to be the O RING KING, and we have been fighting for the goal for more than 10 years, if you need any o rings , ORK is your best choice.
Bellow is the drawing of o ring:
Standard Color: Black
Material Description:
| Material |
FKM/FPM(fluoroelastomer) |
| Advantage |
1,Excellent High Temperature Resistance |
| 2.Excellent Abrasion-Resistance |
| 3,Excellent Oil Resistance |
| 4.Excellent Weathering Resistancee |
| 5.Excellent Ozone Resistance |
| 6.Good Water Resistance |
| Disadvantage |
1.Poor Low Temperature Resistance |
| |
2.Poor Oxygenated-Solvent Resistance |
| Temperature |
-20℃~230℃ , -40℃~250℃(special formula) |
| Application |
1.For Auto |
| 2.For Aerospace |
| 3.For Electronic Products |
| MATERIALS TEST REPORT |
| FKM 70 BLACK COMPOUND |
| ASTM D2000 M2HK 710 A1-10 B38 EO78 EF31 F13 |
| Press Cure |
Post Cure |
| Sheet : 10min 170℃ |
Sheet : 16 hrs230℃ |
| Button : 10 min 170℃ |
Button : 16 hrs 230℃ |
| ORIGINAL PROPERTIES |
SPECIFICATION |
TEST RESULT |
ASTM TEST METHOD |
| HARDNESS SHORE A |
70°±5 |
70 |
D2240 |
| TENSILE STRENGTH, MPA, MIN |
≥10 |
14.2 |
D412 |
| ULTIMATE ELONGATION, ％, |
≥175 |
253.0 |
D412 |
| SPECIFIC GRAVITY (g/cm3) |
|
1.85 |
D297 |
| |
| HEAT RESISTANCE 70 H . AT 250℃(A1-10) |
|
|
D573 |
| CHANGE IN HARDNESS, POINTS |
+10 |
+6 |
|
| CHANGE IN TENSILES STRENGTH, % |
-25 |
-15.1 |
|
| CHANGE IN ULTIMATE ELONGATION,MAX % |
-25 |
-22 |
|
| |
| COMPRESSION SET, MAX, 22H AT 200℃(B38 ) |
≤30 |
25.8 |
D395 |
| |
| FLUID RESISTANCE FUEL.101. 70H AT 200℃ (EO78) |
|
|
D471 |
| CHANGE IN HARDNESS, POINTS |
-15~+5 |
-11 |
|
| CHANGE IN TENSILES STRENGTH, MAX % |
-40 |
-22.3 |
|
| CHANGE IN ULTIMATE ELONGATION,MAX % |
-20 |
-7.2 |
|
| CHANGE IN VOLUME % |
0~+15 |
+12.9 |
|
| |
| FLUID RESISTANCE FUEL C, 70H AT 23℃ (EF31) |
|
|
D471 |
| CHANGE IN HARDNESS, POINTS |
±5 |
-3 |
|
| CHANGE IN TENSILES STRENGTH, MAX % |
-25 |
-18.4 |
|
| CHANGE IN ULTIMATE ELONGATION,MAX % |
-20 |
-15.5 |
|
| CHANGE IN VOLUME % |
0~+10 |
+4.3 |
|
| |
| LOW-TEMPERATURE BRITTLENESS NONBRITTLE |
|
|
|
| AFTER 3MIN AT -10°C (F13) |
NONBRITTLE |
PASS |
D2137 |
Process Flow:
Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm, 29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
FAQ:
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
Your message must be between 20-3,000 characters!
