|Place of Origin:||Guangdong,China|
|Minimum Order Quantity:||100 USD|
|Price:||0.01 ~ 2 USD/PCS|
|Packaging Details:||PE inside , Carton Outside|
|Delivery Time:||7-45 work days|
|Payment Terms:||L/C,Paypal, T/T|
|Supply Ability:||30000000 PCS / Month|
|Material:||EPDM||Color:||BLACK , GREEN , YELLOW , PURPLE|
|Standard:||AS568 Bs||Hardness:||30 ~ 90 Shore|
|Temprature Range:||-35 ~ 140 ℃||Size:||Any Sizes Are Acceptable|
EPDM is acceptable for temperature applications between -70 degrees F (-57 degrees C) to 300 degrees F (149 degrees C). It is compatible for use with water and steam, silicone oil and grease, polar solvents (alcohols), acids, glycol-based brake fluids, ozone, and weathering. It is vulnerable to many oils, gasoline, and solvents. This material meets ASTM International standards.
This EPDM O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.
O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.
This EPDM O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.
|Press Cure||Post Cure|
|Sheet : 5min 170℃||Sheet : 1 hrs 125℃|
|Button : 10 min 170℃||Button : 1 hrs 125℃|
|ORIGINAL PROPERTIES||SPECIFICATION||TEST RESULT|
|HARDNESS SHORE A||70°±5||70|
|TENSILE STRENGTH, MPA, MIN||14||14.9|
|ULTIMATE ELONGATION, ％, MIN||300||327|
|SPECIFIC GRAVITY (g/cm3)||1.15|
|HEAT RESISTANCE 70 H . AT 100℃|
|CHANGE IN HARDNESS, POINTS||10||2|
|CHANGE IN TENSILES STRENGTH,%||-25||-4.1|
|ULTIMATE ELONGATION,MAX %||-25||-3.4|
|COMPRESSION SET, MAX, 22H AT 70℃||25||8|
|RESISTANCE TO OZONE|
|EXPOSURE METHOD B||N0 CRACK||PASS|
|WATER RESISTANCE:100℃,70H (EA14)|
|LOW-TEMPERATURE BRITTLENESS NONBRITTLE|
|AFTER 3MIN AT -55°C (F19)||NONBRITTLE||PASS|
Name: epdm o rings Color: Black , red, green or as you like