Place of Origin:
Guangdong,China
Brand Name:
ORK
Certification:
FDA,ROHS,ISO9001,TS16949
Model Number:
Customized
O Ring Cord is a continuous, extruded solid round rubber cord stock supplied in rolls. Unlike finished closed O-rings, this sealing cord can be cut to any required length and spliced on-site to create non-standard, large-size O-ring seals. Multiple rubber materials are available — including NBR, FKM, EPDM and Silicone — to match different working media and temperature environments. It is an economical solution for static sealing where standard molded O-rings cannot meet size requirements.
| Material Options | NBR, Silicone, FKM, EPDM |
|---|---|
| Hardness | Silicone 60A | NBR 70A | FKM 75A | EPDM 70A |
| Temperature Range |
NBR: -30 °C to +100 °C FKM: -15 °C to +200 °C EPDM: -55 °C to +150 °C Silicone: -55 °C to +200 °C |
Cords are extruded as open-ended billets of circular cross-section, similar to an O-ring. The cord achieves its sealing effect through the deformation of its cross-section once installed, when compressed within the installation housing. Under operational conditions, the pressure exerted by the medium reinforces the sealing function.
Good chemical resistance to mineral oils and greases, hydraulic oils H, HL and HLP, non-inflammable hydraulic pressure fluids HFA, HFB and HFC up to approx. +50 °C, and water up to max. +80 °C.
Good chemical resistance to mineral oils and greases, synthetic oils and greases, and engine, transmission and ATF oils up to approx. +150 °C.
Good resistance to hot water and steam, detergents, caustic potash solutions, silicone oils and greases, many polar solvents, and many diluted acids and chemicals, along with a high level of ozone resistance.
Good resistance to water (up to 100 °C), aliphatic engine and transmission oils, and animal and plant oils and fats.
Send your inquiry directly to us