|Place of Origin:||Guangdong,China|
|Minimum Order Quantity:||100 USD|
|Packaging Details:||PE inside , Carton Outside|
|Delivery Time:||7-18 work days|
|Payment Terms:||L/C, L/C,Paypal, T/T|
|Supply Ability:||30000000 PCS / Month|
|Product:||Quad Ring||Type:||X Shape Section|
|Application:||Static And Dynamic||Advantage:||Long Service Life ,lower Friction|
Good Oil And Fuel Resistance NBR Quad Ring For Static And Dynamic Applications
NBR(nitrile butadiene rubber)
For NBR the service temperature can be designed from -55 C to 100 C or up to 130 C depending on
different acrylonitrile content and formula.
NBR compounds have excellent resistance to abrasion, non-polar oils and solvent, water and permeation
(higher acrylonitrile content will be better). NBR also can be used in conditions of dilute acids, alkalis and
salt solution at low temperatures.
|Advantage||1,Excellent Abrasion-Resistance,Good Rebound Resistance|
|2,Good Tensile Strength and Elongation|
|3,Excellent Animal and Vegetable Oil Resistance|
|4,Good Oil and Fuel Resistance|
|5,Good Water Resistance|
|Disadvantage||1,Poor Oxygenated-Solvent Resistance|
|2,Poor Ozone Resistance|
|Temperature||-40℃-100℃, -55℃-130℃(special formula)|
|Application||1,Fuel tank, lubricating oil tank and oil in the hydraulic oil, gas, water, silicone grease, silicone oil and other fluid medium rubber parts, especially the sealing parts.|
|2,It is currently the most widely used, the lowest cost of rubber seals.|
Quad Ring Product introduction
A variation of the standard O-ring, Quad-Rings have an X-shaped cross section suitable for sealing a range
of static and dynamic applications. This provides higher sealing efficiency and lower friction than conventional O-Rings.
Recommended for low speed reciprocating or oscillatory motion if O-Rings twist.
Provides lower friction than O-Rings and Square Rings.
Quad Ring/X-Rings are interchangeable with O-Ring sizes and glands design.
Available in the same size standards and custom sizes as O-Rings.
Readily available in USA AS568 standard sized NBR Buna-N and FKM.
Not recommended for pressures >500 psi.
Quad Ring/X-Rings may not be available in all compounds.
Custom size Quad Ring/X-Rings can require a tooling cost in some compounds.
Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,VITON(FKM),NEOPRENE(CR), NR, IIR, SBR, ACM, AEM,Fluorosilicone(FVMQ),
FFKM, Liquid Silicone, etc.
Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best
suit your needs while keeping material costs in mind.
Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation within 24 hours.
Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.
Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 10-16 days, no mold about 18-25 days, depending on
the product situation.
Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw materials, process inspection,to ensure the quality
of the production process, shipping 100% of the full inspection; automatic inspection machine full inspection,
and according to customer needs before the mass production of pre-production samples.
Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also be packed according to customer's requirements.
Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or L/C at sight, West Union,VISA,
Paypal is also accepted.
Contact Person: Shadow Zhang