|Place of Origin:||DONGGUAN, CN|
|Certification:||ISO9001, IATF16949, RoHs, Reach|
|Model Number:||Custom according to drawing or samples|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||PE bag inside, carton outside,cartons on pallets|
|Delivery Time:||15 days for molds and samples, 20 to 35 days for mass production|
|Payment Terms:||T/T, L/C,Paypal|
|Supply Ability:||100000 pcs/week|
|Dimensions:||According To Samples Or Drawing||Material:||Silicone|
|Hardness:||Duro 35~80shore A||Color:||Black/Blue/Red|
|Special Requirement:||As Customer Required||Payment Term:||30% T/T In Advance,70% Before Shipment|
Soft Nitrile Molded Rubber Parts,
ORK Molded Rubber Parts,
Soft Nitrile automotive connector seal
Colorful Soft Nitrile Silicone rubber Custom Automotive Connector Seal For Cable
Custom automotive connector seal usually made by soft nitrile rubber or silicone rubber, can be black blue red and other colors. The main fuction is for protecting the cables from water and dusty.As electronic connectors for use in automobiles have to be tough and reliable. As they are often placed in parts of an automobile that are open to the elements, they are typically very well sealed against dust ingress and moisture, and usually have a good degree of heat resistance. Also, due to the vibration factors of being installed in a vehicle, the connectors will often have secure locking systems built into the plug and socket to prevent unwanted disconnect.
First, please send me 2D drawing, 3D drawing or sample of what you need. From the drawing or sample we can know the dimensions and materials. And then if any special requirement, please also let me know.
Second, we make molds/toolings and samples, send the samples to customers for testing.
Third, after the samples confirmed, we start mass production, during production, our QC department will control the quality. Then pack and ship the goods by air or by sea. Production flow as bellow:
Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure →
First Part Inspection → Casual Inspection → Burr Dealing → Eye Inspection → IPQC →
Washing or Grinding → Post Cure → FQC → Packing
Last but not least, after-service. when the products have quality problem, then you can tell me, we will solve the problems together.
We usually make the rubber circular connector seal by silicone. Then the orperating temperature can be -50℃~200℃.
And sometimes the material can also be nitrile rubber.
|MATERIALS TEST REPORT|
|N6001 (NBR 60 SH BLACK) COMPOUND|
|ASTM D2000 M2BG 610 A14 B14 EO14 EO34 EA14 F17|
|Press Cure||Post Cure|
|Sheet : 5min 170℃||Sheet : 1 hrs 120℃|
|Button : 10 min 170℃||Button : 1 hrs 120℃|
|ORIGINAL PROPERTIES||SPECIFICATION||TEST RESULT||ASTM TEST METHOD|
|HARDNESS SHORE A||60°±5||64||D2240|
|TENSILE STRENGTH, MPA, MIN||≥10||10.36||D412|
|ULTIMATE ELONGATION, ％, MIN||≥300||306.8||D412|
|SPECIFIC GRAVITY (g/cm3)||1.18||D297|
|HEAT RESISTANCE 70 H . AT 100℃(A14)||D573|
|CHANGE IN HARDNESS, POINTS||+/-15||5|
|CHANGE IN TENSILES STRENGTH, %||+/-30||10.42|
|CHANGE IN ULTIMATE ELONGATION,MAX %||-50||-15.88|
|COMPRESSION SET, MAX, 22H AT 100℃(B14 )||≤25||13.22||D395|
|FLUID RESISTANCE NO.1 OIL, 70H AT 100℃ (EO14)||D471|
|CHANGE IN HARDNESS, POINTS||-5~+10||1|
|CHANGE IN TENSILES STRENGTH, MAX %||-25||10.90|
|CHANGE IN ULTIMATE ELONGATION,MAX %||-45||-11.09|
|CHANGE IN VOLUME %||-10~+5||0.56|
|FLUID RESISTANCE NO.3 OIL, 70H AT 100℃ (EO34)||D471|
|CHANGE IN HARDNESS, POINTS||-10~+5||-8|
|CHANGE IN TENSILES STRENGTH, MAX %||-45||-32.52|
|CHANGE IN ULTIMATE ELONGATION,MAX %||-45||-42.40|
|CHANGE IN VOLUME %||0~+25||18.63|
|WATER RESISTANCE:100℃,70H (EA14)||D471|
|CHANGE IN HARDNESS, POINTS||±10||+2|
|CHANGE IN VOLUME %||±15||-2.92|
|LOW-TEMPERATURE BRITTLENESS NONBRITTLE|
|AFTER 3MIN AT -40°C (F17)||NONBRITTLE||PASS||D2137|
Item Name: Automotive Connector Seal; Material:Silicone rubber or nitrile rubber; Color: Black/blue/Red or other color
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
Contact Person: aaron